Are you disturbed by static discharge during your SMT PCB assembly process? We are an expert to help you. Our ESD ionizing blower is a powerful device that helps remove static electricity. It uses a small fan to create airflow. You can easily adjust the airflow using touch buttons or a remote control.
Key Features of ESD ionizing blower
- Automatic Cleaning: The ionizing needle brush has an automatic cleaning feature. It remembers to clean itself every 8 hours. This means no manual cleaning is needed. You can also set your own cleaning schedule based on your needs.
- Fault Alarms: The device has alarms for high-voltage faults. It also has warning lights. This gives you both sound and light alerts to know if the equipment is running normally.
- Obstacle Protection: If the fan meets an obstacle while working, it automatically short-circuits and stops. This helps protect the device from damage.
Specification:
Model: EI-1104
Voltage: 220V 50Hz
Current consumption: ≤0.55Amp
Airflow: 120~300CFM
Airflow characteristics: Covering area of 30cmX110cm.
Operating temperature: 32ºF(0ºC)~122ºF(50ºC)
Ozone level: 0.03PPM (measured at 6 inches in front of the fan with minimum airflow) Noise level: Minimum 50dB, maximum 69dB
Outer casing: Baked paint
Surface: Electrostatic spray
Dimensions: 1100mm(L) × 184mm(W)×110mm(H)
Ion balance: 0v±15v
Why Choose our ESD Ionizing Blower?
The ESD ionizing blower is reliable and easy to use. It offers:
- Automatic self-cleaning
- Simple adjustments for airflow
- Clear alerts for faults
- Protection against blockages
This makes it a smart choice for environments where static electricity is a concern.
Decay Test Conditions | |||
Operating Voltage:110V/220V Testing Voltage:1KV to 100V Temperature:22℃ | |||
Distance | 300mm | 600mm | 900mm |
Left | +1.1s | +1.6s | +2.8s |
-1.2s | -2.0s | -3.0s | |
Right | +1.0s | +1.8s | +2.8s |
-1.2s | -1.2s | -1.2s |