The automatic SMD counter goes beyond simple counting with the label printer and bar code scanner. Simply scan the bar code on your reel, conduct the count, and then produce a new label displaying the reel’s bar code, the current quantity, and the date and time of the count.
The E-900L SMD component counter comes with a bar code scanner and label printer, allowing for swift setup and changeover. Whether counting out a full SMD reel or a specific quantity of components, the E-900L’s double-check feature ensures accuracy. Additionally, the automatic SMD counter E-900L is fast, able to process an entire reel of components in just ninety seconds. It is well-suited for inventory management, stock checks, intake counts, pre-kitting, and other tasks.
Specification
Model: E-900L
Voltage: AC220V/AC100V 50/60HZ
Counting Range: -99999_99999PCS
Machine Size: LxWxH=780x350x200mm
Machine Weight: 10-11kg
Component pitch: 1,2,4,8,10,12,16,24,32,44,56mm etc.
Easy to use
The design of the E-900L allows operators to monitor both the LCD screen and the parts under counting, ensuring accuracy. Additionally, the counter prevents tape dropping and protect tapes from damage during the counting process. It can count in both forward and reverse directions for double-checking purposes, and parts can be efficiently spooled back to their original reel.
How to set up the counter correctly?
Place the reel on the left side and ensure to position a temporary reel on the right side. Guide the tape through the counting gears manually and rotate the temporary reel until the first component aligns with the press wheel.
Adjust the pitch value according to the specified guidelines.
Press the START key to initiate the counting process.
To return the tape to the original reel and verify the counting result, press the REWIND key to initiate the rewinding process.
